Things this post is about:
- Anytone 878uvii plus – Amazon Ref Link https://amzn.to/4bhUstV
- Pi-Star Hotspot – Amazon Ref Link https://amzn.to/41sGFgS
I recently updated my 878uvii plus to the newest firmware ver. 3.06 because I am interested in the new satellite tracking ability that allows the radio to predict satellite passes based on your GPS coordinates. The update wasn’t with out issues and I’ll talk briefly about them here in case anyone has the same issues with this update.
Issues:
- After flashing the firmware my radio didn’t show Satellite or Digi Mon in the radio menu. This caused quite a bit of frustration as I flashed the radio again and again thinking it was a bad flash. My starting firmware was 3.03 FYI. I searched all over the internet and couldn’t find any posts with people having the same problem. I finally broke down and made a Reddit post about the issue and someone mentioned that it might be that the radio is in professional mode not amateur mode. After using the cps to change the radio mode to amateur the two missing menu items showed back up. So if you flash 3.06 and the satellite menu option is missing check that the radio working mode is set to amateur not professional.
- To load the satellite keps / TLEs in cps 3.06 you click Tool – Satellite Data Update. This gives you two option of places to download the info from. You can download the info and write it to the radio BUT WAIT! there is an issue with the data you might not notice right away. The data that is downloaded adds a CTSS tone squelch to receive so you have to manually go through and change the tone to off for each satellite you want to work. It also downloads some oddball sats that I have no idea what they are. Maybe weather sats?
- The satellite data update screen has an option to export the data. this is broken. It swaps the receive and transmit frequencies and does something else that breaks the file when you try to write it to the radio. You’ll end up with a blank screen on the radio if you try this.
- Analog APRS is broken in this version of the firmware. I see it has been broken for the last few versions of firmware but this is the first one I have used that it is truly good and broke. I can see the radio keys up to send the APRS info but nothing is received by any of my other radios set to APRS.
- There is a buffer overflow if you type a number bigger than 6 digits into the APRS fields in the CPS without the . i.e 144390099 vs 144.390 I did this by accident the cps crashed and I lost a few hours of work.
- GPS Roaming is just broke. If you add anything to any of the field under GPS roaming you’ll get a commerrordo or something like that when you try to write to the radio. Best to not touch this setting in the CPS.
Final thoughts:
All in all the update is about what to expect with Anytone’s history of firmware updates that bring a new function but break other things. I haven’t had a good chance to test out the satellite predict feature since I’ve spent the last 4 days rebuilding my codeplug but I am hopeful it works well enough to make a sat contact while out in the wild.
